Exo Terra Thermostat & Hygrostat with Timer

Thermostat & Hygrostat with Day/Night Timer

• Dimming function controls terrarium temperatures very accurately
• 100W Hygrostat to control optimum humidity levels
• Controls heating devices up to 600W
• Daytime and night-time temperature and humidity can be set individually
• EU: From 10°C up to 60°C (50°F – 140°F) and up to 99% RH
• Easy-to-read LCD screen shows actual temperature and humidity
• Red LED will indicate when heating device is powered
• Blue LED will indicate when humidifying device is powered
• Push button/dial system to avoid accidental setting or tampering
• Remote temperature and humidity probe
• Extra long 190cm power-cord

Reptiles are ectotherm, and use heat from an external source to thermoregulate their optimal body temperature. Most reptiles use direct radiant heat from the sun in combination with conductive heat from sun-heated surfaces such as branches, rocks or other heat accumulating structures. Next to heat, overall humidity is a very important factor for the health and wellbeing of reptiles, amphibians and invertebrates. Providing such a species related temperature gradient, in combination with appropriate humidity levels, in the terrarium is an important factor in successful reptile and amphibian keeping. With the Exo Terra Thermostat & Hygrostat with Day/Night timer you can create a well-controlled heating/humidifying system that allows you to maintain the required temperature and humidity conditions similar to those found in desert and tropical environments. The day- and night temperature and humidity can be set individually. For instance; the temperature can be set lower for the night, while the humidity can be set higher, just as it would occur in nature. The Thermostat & Hygrostat will also help to prevent overheating and undercooling during hot summer days or cold winter nights, while keeping the humidity at the desired level. The Dimming function keeps the temperature at the desired set-point with a much higher accuracy than conventional thermostats and virtually eliminates temperature swings in the terrarium. The easy-to-read LCD screen shows heating mode, day or night mode and actual temperature and humidity. A Red LED will indicate when the heating device is powered and once the set temperature is reached, the Red LED will no longer show. A Blue LED will indicate when the humidifying device is powered and once the set humidity level is reached, the Blue LED will no longer show. Simply connect your Heat Mat, Heat Cable or Ceramic Heater and a Fogger or Humidifier to the Exo Terra Thermostat & Hygrostat, set the preferred temperature & humidity and place the heat and humidity sensor in the desired spot. The push button/dial system of the Thermostat & Hygrostat will prevent accidental changes of the set temperature and humidity level if the device is being handled. The Thermostat comes with a power cord with grounded plug & receptacle for increased safety and to allow the use of a power outlet strip. The remote sensor can be safely used in highly moist terrariums. Can be used with the following Exo Terra® heating/humidifying sources: Day & Night Heating:
Heat Mat (PT2015/16/17/18)
Ceramic Heater (PT2044/45/46/47)
Infrared Basking Spot (PT2141/42/44/46)
Night Heat Lamp (PT2120/22/26) Day Time Heating:
Daytime Heat Lamp (PT2102/04/10/11/12/14)
Daylight Basking Spot (PT2195/31/32/33/34)
Intense Basking Spot (PT2196/35/36/38/40) Humidity
Humidifier (PT2081) Powered by youtube embed video generator